Mercury Elite 650VA UPS
Build in AVR with wide input range of 140~300VAC
Auto restart
Output short circut protection
Overload protection
Overcharge protection
Sleek and compact design with cpu control
Build in AVR with wide input range of 140~300VAC
Auto restart
Output short circut protection
Overload protection
Overcharge protection
Sleek and compact design with cpu control
50Hz With Fuse
140V-300V, 390W
220Vac-7%+15% ( in battary mode )
TYPICAL 4-8 ms
50Hz, 50 Hz±1Hz
FUSE & firmware protection 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately)
12V/8.2AH x 1, About 1A at normal mode
5.6kg +/- 0.3Kg
45.5 x 40 x 23.5 (cm) (4pcs)
Technical Specification | |
Input voltage | 220VAC |
Input frequency | |
Input phase | Single phase |
Input socket | |
Cold Start (0 to 100% load) | Press the ON/OFF switch |
Input range (220V) | |
Rating output (VA). | 650VA |
Rating output (W). | |
Rating output (W). | Battery mode(simulated sine wave), AC mode (sine wave) |
Power factor | |
Rating voltage | 220V |
Output range | |
Rear Output Socket | 2xUniversal - Battery backup |
Transfer time | |
Communication Interface | NIL |
Rating frequency | |
Output Frequency Line-mode | Synchronize with the Utility |
Battery mode | |
Output Frequency Line Mode | Synchronize with the utility |
Short Circuit Protection Line Mode | |
Battery Mode | Software protection controlled by firmware |
Overload Protection Line Mode | |
Battery Mode | 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) |
Rating frequency | |
Backup Tim - Typical | 10mins to 18mins (depending on load) |
Charge Current | |
Over Charge Protection | >14.5V +/- 0.2V stop charging <13.5V +/- 0.5V Recharge |
Weight | |
Dimension | 390x 145 x 220 (mm) |
Master Carton |